 |
| 「アメリカ人ですけど何か？」 |
*沖縄のCATIA職業訓練コースで自分が取っていた覚え書きから
*From my memo I was taking during my CATIA job training course in the Okinawa island, Japan
SECTION 1
製品構成番号の作成 Assigning Instance Numbers
1. Assigning Instance Numbers
1) Click on the "Generate Numbering" icon.
2) Select the top Product.
==> The "Generate Numbering" dialog box will be displayed.
3) Select a Mode option and click OK.
==> Instance number is assigned to each component.
2. Checking Instance Names
Right-click on a component to select Properties > Product (tab) > Instance (Number)
Using Instance Names
Create balloons in Drafting (Use the "Generate Balloons" icon)
Parts list
SECTION 2
部品表の表示 Displaying Parts List
1. 部品表の表示 Displaying Parts List
1) In the tree, double-click on the assembly or sub-assembly to activate it.
2) Select "Bill of Material" from the Analysis pull down menu.
==> The "Bill of Material" definition box will be displayed.
3) In the definition box, click the "Define formats" button.
==> The "Bill of Material: Define formats" window will be displayed.
4) In the "Displayed properties" column of the "Properties for the Bill of Material" area,
select the items to show up on the list. Click OK when finished.
==> The changes will be made to the list in the "Bill of Material" window. Click OK to close.
(Note: The changes made to the above procedure will not be saved in CATIA. The settings will be
kicked back to default the next time you launch CATIA.)
2. 部品表のファイルとして保存 Saving the List as File Format
1) In the "Bill of Material" window, click on the "Save As" button.
2) Save the list with one of the available file formats.
Available formats: .txt (Note pad), .html (HTML), .xls (Excel)
3. 部品表をドラフティングに作成 Displaying BOM into Drafting
Created BOM can be displayed into Drafting.
(Additional Note: Material and mass can be added by accessing "Properties".)
4. リスト作成レポートの表示 Displaying a Listing Report
1) Activate an assembly or sub-assembly by double-clicking it in the tree.
2) Select "Bill of Material" from the Analysis pull down menu.
==> A dialog box appears.
3) Go to the "Listing Report" tab.
4) Specify the displaying items in the "Displayed properties" column.
5) Click on the "Refresh" button to create a list report. Click OK when finished.
5. リスト作成レポートをファイルとして保存 Saving a Listing Report as File Format
(Note: Only ".txt" format is available.)
Use "Save As" in the Bill of Material" definition box.
 |
| Photo taken at a Chinese buffet restaurant Love the sushi here :)) 中華の食べ放題で寿司ばかり喰う |
自分が沖縄でCATIA講習を受けた際にとっていたノートを元に、おおまかな知識を書き出してみたのだけれども、久しぶりに見直してみて、随分いろんなことを習ったものだと改めて思うに到り、中には今になって、なるほどそういうことだったか、と合点のいくものもあったりで、復習をしてみる意味においても、当時のメモやノートを掘り起こすのは悪くないかと思い、書いてみた次第です。
